Skip to content

CFRP Tubes

Carbon-fibre-reinforced polymer tubes for lightweight structural members.

A carbon-fibre tube with its plies stepped back at the ends and bolted carbon-fibre end fittings.

End fittings

Selected for the load case and the joint.

90° ply

Hoop fibres: resist crushing and pressure.

−45° ply

Carries torsion with the +45° ply.

+45° ply

Carries torsion and shear.

0° ply

Axial fibres: bending stiffness and axial load.

CFRP tube.

Carbon-fibre tubes replace aluminium and steel tubing where mass, stiffness and dimensional stability drive the design.

Illustrative model, not to scale.

Ply by ply. Each ply is laid at the angle its load needs. Scroll on to slide off the end fittings and lift the plies apart.

Built to the load case. Fibre, resin system, lay-up and end fittings are selected for each load case and built to the customer’s design.

  • End fittings: Selected for the load case and the joint.
  • 90° ply: Hoop fibres: resist crushing and pressure.
  • −45° ply: Carries torsion with the +45° ply.
  • +45° ply: Carries torsion and shear.
  • 0° ply: Axial fibres: bending stiffness and axial load.

What it is

CFRP tubes replace aluminium and steel tubing where mass, stiffness and dimensional stability drive the design.

Fibre, resin system, lay-up and end fittings are selected for each load case and built to the customer's design.

Where it is used

  • Truss members for satellite and deployable structures
  • UAV airframe booms and spars
  • Antenna masts and support struts

Request a quote.

Send the drawing or the requirement for CFRP Tubes, and an engineer will reply to scope the work.

Request a quote