Skip to content

CFRP Large-Diameter Tubes

Large-diameter CFRP cylinders for primary and camera structures, adapters and housings.

A large-diameter CFRP cylinder with carbon-fibre interface rings, resting on its side.

Interface rings

Machined rings for the mounting scheme.

CFRP shell

The wall, laid up to the load case.

Stringers

Longitudinal stiffeners along the wall.

Ring frames

Hold the cylinder round under load.

Large-diameter tube.

It carries primary loads in cylindrical structures where a metallic shell would add mass.

Illustrative model, not to scale.

Taken apart. Scroll on to slide off the interface rings, lift the shell and draw out the frames.

Built to the load case. Wall lay-up, local reinforcement and interfaces are designed to the load case, stiffness requirement and mounting scheme.

  • Interface rings: Machined rings for the mounting scheme.
  • CFRP shell: The wall, laid up to the load case.
  • Stringers: Longitudinal stiffeners along the wall.
  • Ring frames: Hold the cylinder round under load.

What it is

Large-diameter tubes carry primary loads in cylindrical structures where a metallic shell would add mass. They are used for primary structures and for camera structures, where the tube holds the optics in alignment.

Wall lay-up, local reinforcement and interfaces are designed to the load case, stiffness requirement and mounting scheme.

Where it is used

  • Cylindrical structures for spacecraft and launch-vehicle sub-assemblies
  • Camera and optical payload structures
  • Housings and enclosures for airborne equipment
  • Masts and support columns for ground antennas

Request a quote.

Send the drawing or the requirement for CFRP Large-Diameter Tubes, and an engineer will reply to scope the work.

Request a quote