Corrugated S-Band Microwave Antenna
An S-band microwave antenna with a corrugated feed horn, made entirely of carbon fibre.


Corrugated feed horn
Grooved wall for an even beam and low cross-polarisation.
Feed struts
Hold the horn at the focus.
Carbon-fibre reflector
Stable geometry across temperature.
Pedestal positioner
Turns the antenna in azimuth and elevation.
S-band antenna.
An S-band microwave antenna made entirely of carbon fibre: the reflector, the feed horn and the structure that holds them.
Illustrative model, not to scale.
Taken apart. Scroll on to lift it apart: the reflector off its positioner, then the feed struts and the horn.
Designed as one assembly. Electrical and mechanical design are carried out together, so the RF performance and the structure are verified as one.
- Corrugated feed horn: Grooved wall for an even beam and low cross-polarisation.
- Feed struts: Hold the horn at the focus.
- Carbon-fibre reflector: Stable geometry across temperature.
- Pedestal positioner: Turns the antenna in azimuth and elevation.
What it is
The antenna is made entirely of carbon fibre: the reflector, the corrugated feed horn and the supporting structure. That keeps the mass low and the geometry stable across temperature.
Its feed horn is corrugated: rings of grooves, about a quarter-wavelength deep, line the inside wall. The grooves make the horn radiate the same beam in every plane, so it lights the reflector evenly, with low cross-polarisation and low side lobes. The result is a cleaner beam and better use of the reflector area than a smooth-walled horn gives.
Electrical and mechanical design are carried out together, so the RF performance and the structure are verified as one assembly.
Where it is used
- Satellite communication links
- Telemetry and command links
- Ground and airborne terminals
Goes with

Helical Antenna
Helical antennas for circularly polarised links.

C, Ku and Ka Band Antennas
Antennas for satellite communication in C, Ku and Ka bands.

Composite Radomes and Radome Materials
Radomes, radome films and materials that shield radar and antennas while letting radio waves through with minimal attenuation.
Request a quote.
Send the drawing or the requirement for Corrugated S-Band Microwave Antenna, and an engineer will reply to scope the work.